Quick Setup

 This is a quick setup guide to get users started using their Innovo Inventor 3D printer.


Powering On Your 3D Printer

1. Place the printer on a steady surface near a power outlet. Connect the power cable to the printer and a 110VAC power source.  Turn the printer on using the power switch.

Odoo text and image block

2. The touchscreen will take a few moments to load.  Once ready, you will see the following Main Menu on the display. The printer is now ready to print.



*NOTE: If this is your first time using the printer, it should be calibrated using the
Auto-Leveling feature.  Select Printer Cmds, then Auto-Level.
The printer will home all axes and then raise the bed toward the nozzle to begin the auto-levelling process.  Please wait until it is finished before using the printer.

Odoo text and image block

How to 3D Print

1. From the Main Menu you can find your print files by selecting G-Codes.  Once selected, you will see a list of all of the G-Code Print files stored in the 3D Printer.  Select one of the files to print. 

 

Odoo text and image block

2. After selecting the print, a new dialogue will appear showing the print information.  Review that all of the information is correct.  Select Print when you are ready to begin the print.  The printer will home all axes and begin warming up the extruder for printing.

Odoo text and image block

3. Once the printer begins the printing process, you can monitor the progress in the touchscreen display.

Odoo text and image block

1 Star 2 Star 3 Star 4 Star 5 Star